Tamiya 58442 1/10 Electric Car Hatsune Miku Z4 (TT01E) (Updated at 2010/03/01 20:31)

Tamiya 57800 1/10 XB - Expert Built Electric M3 Evo (TT-01D Type-E)

The BMW M3 E20 Sport Evo was released in 1990. The BMW Sport was the third and final edition of the Evolution M3 series. The Sport includes many modifications from the standard M3 models that concentrate on performance racing. Due to Touring Car race rules, the Sport Evo displaced 2467cc to comply with the rule that required you to run the same engine and displacement as the Homologated car. This superb on-road vehicle is offered by Tamiya on the TT-01D Type E drift chassis and equipped with LED lights.

Specs & Features
Ready-to-Run 1/10 R/C assembly kit model.
Based on the lightweight and user-friendly TT-01D Type-E chassis.
4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
Drift-spec modifications include special suspension tuning, full ball bearings, RS-540 sport tuned motor, aluminum heat sink, CVA super mini shock dampers and short springs and adjustable upper arms.
Polycarbonate body and front light cases capture the stylish form of the BMW M3.
BBS wheels with Super Driftech tires (24mm, offset +2)
Comes equipped with LED Light Unit (TLU-01) and two 5mm diameter white LEDs to depict realistic headlight action.
TEU-104BK ESC and 2-channel Finespec FM Radio Control System included.
Battery pack and charger separately required.
A wide variety of Option Parts are separately available to further customize your machine.


How to get Tamiya 57800 1/10 XB - Expert Built Electric M3 Evo (TT-01D Type-E)? Click here!

Tamiya 51402 Bodies S800 Racing Body

Includes clear polycarbonate body, sticker sheet, and metal-plated parts for the front grille, and light cases.
Can be used with M-05 and M-05 PRO chassis machines (Short wheelbase: 210mm).


How to get Tamiya 51402 Bodies S800 Racing Body? Click here!

Tamiya 58459 1/10 Electric Car RCC Datsun 240Z Rally Version (DF-03Ra Chassis)

The East African Safari is one of the world's more grueling off-road racing events. It began in 1953 to mark the Coronation of Queen Elizabeth II. The event took place through the East African nations of Kenya, Uganda, and Tanzania. The event continued over four days to complete the 6,200km journey.

About the East African Safari RallyAfter a victory in 1970, Nissan entered the 1971 Safari Rally with four Datsun 240Z series cars. The 240Z, which was powered by a 5-speed, straight-six L24 OHC engine, became popular among spectators because of its incredible performance. The No. 11 Datsun 240Z, driven by Herrman and Schuller, won the Over-all Victory, Class Victory, Team Victory and Manufactures Championship. Nissan became the first company to win back-to-back victories in all three categories. Herrman and Schuller became the first team to win back-to-back over-all victories.
Specs & Features
1/10 R/C assembly kit.
Wheelbase: 251mm. (Use kit supplied suspension arms for a short wheelbase)
Polycarbonate body.
Stickers and masking seals included.
Type 540 motor included.
Light cases, two spotlights on the hood, and front and rear bumpers are reproduced with separately molded resin parts.
Add exciting lighting action to your machine with separately available Tamiya LED light Unit TLU-01 (Item 53909) (LEDs not included in kit).
Black offset +2 wheels and Rally Block Tires included.
TEU-104BK ESC included.
2-ch R/C system, battery pack and charger are separately available.
A wide variety of Option Parts are available to further customize your chassis.


How to get Tamiya 58459 1/10 Electric Car RCC Datsun 240Z Rally Version (DF-03Ra Chassis)? Click here!

Tamiya 58455 1/10 Electric Car Nissan GT-R (TT-01D Type-E)

The GT-R is now available on the excellent drift spec TT-01D Type-E chassis and is the perfect way to enter the world of R/C drifting.

Specs & Features
Based on the lightweight and user-friendly TT-01D Type-E chassis.
4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearboxes.
Drift-spec modifications include tuned suspension, RS-540 sport-tuned motor, aluminum heat sink, CVA mini shock dampers and soft springs and adjustable upper arms.
Super Driftech tires which are made from a resin and rubber compound specially designed for long-lasting drift action. (26mm width)
LED Light Unit TLU-01 (Item 53909) and 2 white and 2 red 5mm LED lights are included.
2-channel R/C system, battery pack and charger separately required.
Wide variety of Option Parts are separately available to further customize your chassis:
Item 53937 Tamiya LED Light Control Unit (TLU-02)
Item 51000 Hi-Torque Servo Saver (Black)
Item 54026 TT-01 Alu. Prop. Joint & Shaft
Item 54059 TT-01 Type-E Carbon Damper Stay (Front)
Item 54060 TT-01 Type-E Carbon Damper Stay (Rear)


How to get Tamiya 58455 1/10 Electric Car Nissan GT-R (TT-01D Type-E)? Click here!

Tamiya 58454 1/10 RC M-Chassis Electric S800 Racing (M-05)

Specs & Features
1/10 R/C assembly kit of the Honda S800.
Polycarbonate body mounted on the M-05 chassis.
Monocoque frame features a layout that optimizes weight distribution and lowers the chassis' center of gravity.
The 3-piece tie-rod steering linkage offers sharp cornering performance.
Sticker sheet and type 540 motor included.
2-channel R/C system, battery pack, and charger are separately required.
Wide variety of Option Parts are separately available to further customize your machine:
Item 54000 M-Chassis Aluminum Damper Set (4pcs.)
Item 54177 M-05 Aluminum Front Upright (Blue)
Item 54178 M-05 Aluminum Rear Upright (Blue)
Item 54179 M-05 Ball Bearing Set
Item 54180 Titanium Screw Set


How to get Tamiya 58454 1/10 RC M-Chassis Electric S800 Racing (M-05)? Click here!

Tamiya 58451 1/10 Electric Car BMW M3 EVO (TT-01D Type-E)

The classic BMW E30 M3 Sport Evo comes loaded on the TT-01D drift spec Type E-chassis. The BMW E30 M3 was built on the same platform as the E30. The modifications to the M3 are a widened front suspension and improved drive train from the E30 325i, which was also used in the BMW Z1 roadster. The E30 M3 was produced from 1986 to 1992, but still remains popular among BMW enthusiasts today.

Specs & Features
Based on the lightweight and user-friendly TT-01D Type-E chassis.
4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearboxes.
Drift-spec modifications include special suspension tuning, RS-540 sport-tuned motor, aluminum heat sink, CVA mini shock dampers and soft springs and adjustable upper arms.
Includes BBS silver wheels with Super Driftech tires which are made from a resin and rubber compound specially designed for long-lasting drift action. (24mm width)
Includes two 5mm diameter white LEDs to depict realistic headlights.
Includes TEU-104BK ESC.
2-channel R/C system, battery pack and charger separately required.
Wide variety of Option Parts are separately available to further customize your chassis:
Item 53937 Tamiya LED Light Control Unit (TLU-02)
Item 51000 Hi-Torque Servo Saver (Black)
Item 54026 TT-01 Alu. Prop. Joint & Shaft
Item 54059 TT-01 Type-E Carbon Damper Stay (Front)
Item 54060 TT-01 Type-E Carbon Damper Stay (Rear)


How to get Tamiya 58451 1/10 Electric Car BMW M3 EVO (TT-01D Type-E)? Click here!

Tamiya 54213 Option Parts M-Chas. 3x48.5 TC Sus.Shaft*2

These new suspension shafts feature a titanium coat which provides extra hardness, assists in preventing scratches from sand and dust, and helps to maintain a smooth suspension movement. These shafts come in an eye-catching titanium gold color.

Newly designed 3x48.5mm Titanium Suspension Shafts x 2pcs.
2mm E-Ring x 4pcs.
To be used with the inside lower arms on M-05 chassis machines.
Can be used with M-03, M-04, M-05, and M-05 PRO chassis machines.


How to get Tamiya 54213 Option Parts M-Chas. 3x48.5 TC Sus.Shaft*2? Click here!

Tamiya 54212 Option Parts M-Chas. 3x37 TC Sus.Shaft*2

These new suspension shafts feature a titanium coat which provides extra hardness, assists in preventing scratches from sand and dust, and helps to maintain a smooth suspension movement. These shafts come in an eye-catching titanium gold color.

Newly designed 3x37mm Titanium Suspension Shafts x 2pcs.
2mm E-Ring x 4pcs.
To be used with the outside lower arms on M-05 chassis machines.
Can be used with M-03, M-04, M-05, and M-05 PRO chassis machines.


How to get Tamiya 54212 Option Parts M-Chas. 3x37 TC Sus.Shaft*2? Click here!

Tamiya 53987 Option Parts TRF501X Drive Belt (369mm)

Compatible Chassis or Parts: TRF501X

How to get Tamiya 53987 Option Parts TRF501X Drive Belt (369mm)? Click here!

Tamiya 53850 Option Parts Titanium Coated Damper Shaft*2

Tamiya 53850 Option Parts Titanium Coated Damper Shaft*2

How to get Tamiya 53850 Option Parts Titanium Coated Damper Shaft*2? Click here!

Tamiya 53170 Option Parts Glass Tape (15mmx25m)

Tamiya 53170 Option Parts Glass Tape (15mmx25m)

How to get Tamiya 53170 Option Parts Glass Tape (15mmx25m)? Click here!

Tamiya 53119 Option Parts Special King Pin

Compatible Chassis or Parts: F103

How to get Tamiya 53119 Option Parts Special King Pin? Click here!

Tamiya 51285 Option Parts TRF501X Drive Belt

Compatible Chassis or Parts: TRF501X

How to get Tamiya 51285 Option Parts TRF501X Drive Belt? Click here!

Tamiya 51282 Option Parts TRF501X X Parts(Damp.Retainer)

Compatible Chassis or Parts: TRF501X

How to get Tamiya 51282 Option Parts TRF501X X Parts(Damp.Retainer)? Click here!

Tamiya 50965 Spare Parts TL-01LA Rear Upright

Compatible Chassis or Parts: TB-EVO II, TL-01LA

How to get Tamiya 50965 Spare Parts TL-01LA Rear Upright? Click here!

Tamiya 50964 Spare Parts TL-01LA Front Upright

Compatible Chassis or Parts: TB-EVO II, TL-01LA

How to get Tamiya 50964 Spare Parts TL-01LA Front Upright? Click here!

Tamiya 58452 1/10 Car Sand Scorcher (2010)

Specs & Features
This is an Officially Licensed 1/10 scale R/C assembly kit of the Sand Scorcher.
Comes equipped with full ball bearings to reduce friction loss.
Type 540 motor included.
Comes loaded with many top quality parts for improved performance such as:
A duraluminum plate reinforced 2mm thick FRP main frame for added strength and flexibility to ensure stability.
Newly designed die-cast front and rear suspension arms, front axle, and wheel hubs.
Transparent case protects the R/C mechanisms. The lid can be easily detached by cam locks.
Reinforced front uprights.
Redesigned oil dampers.
Original blister pack style packaging.
Detailed hard plastic body included.
2-channel R/C system and battery pack separately available.
Can be used with separately available LF1100-6.6V Racing Pack (Item 55105).


How to get Tamiya 58452 1/10 Car Sand Scorcher (2010)? Click here!

Tamiya 57799 1/10 XB - Expert Built Electric BMW M3 GT2 2009 (TT01E)

The ready to run electric powered R/C Car of the 2009 BMW M3 GT2 was developed to compete in the American Le Mans Series. Rahal Letterman Racing raced the cars on behalf of BMW Motorsports. The return of BMW to the American Le Mans Series competitions coincided with the 10-year anniversary of the series in 2008.

Specs & Features
Length: 452mm, Width: 188mm, Height: 132mm.
Polycarbonate body is fully finished and captures the beautiful form of the BMW E92 M3.
The improved steering linkage design features TA05 steering posts for sharper steering response.
Shaft driven 4-wheel drive TT-01 Type-E chassis gives this electric R/C car superior control and handling.
Equipped with LED Light Unit TLU-01 (Item 53909) with LEDs for headlights and taillights (2 each). *It is possible to assemble with the separately available LED Light Control Unit TLU-02 (Item 53937) which allows up to 16 pairs of LEDs (total 32 LEDs) to be controlled.
Each front light case has one 5mm and one 3mm LED Light installation points.
Each rear light case has one 5mm and two 3mm LED Light installation points.
Finespec FM transmitter, TEU-104BK ESC, TRU-05 receiver, TSU-03 servo, and type 540 motor included.
Battery pack and charger separately required.
A wide variety of Option Parts are available to further customize your machine:
Item 51000 Hi-Torque Servo Saver Black
Item 53663 Ball Differential Set (TT-01, TGS)
Item 53666 TT-01 Metal Motor Mount
Item 54025 TT-01 Type-E Ball Bearing Set
Item 54026 TT-01 Alu. Prop. Joint & Shaft


How to get Tamiya 57799 1/10 XB - Expert Built Electric BMW M3 GT2 2009 (TT01E)? Click here!

Tamiya 51395 Bodies COROLLA Axio apr GT Body

The Toyota Corrolla was modified for racing in the JGTC series for 2008.'The Corolla Axio was built by APR and unveiled at the Tokyo Auto Salon in 2009. The car features a water-cooled 3500cc V6 engine that delivers 300hp. The car was featured in the 2009 Super GT racing series.

Specs & Features
Polycarbonate shell captures the aero dynamic form of the Corolla Axio apr GT.
Width: 191mm, Length: 435mm, Wheelbase: 257mm.
Screws & nuts, sticker sheet, and masking seals included.
Can be used with TA05 series, TB-03, and TT-01-series chassis.


How to get Tamiya 51395 Bodies COROLLA Axio apr GT Body? Click here!

Tamiya 55108 Option Parts 7.2V Ni-MH/Ni-Cd Battery AC Charger NIC-01

AC Adapter Input: AC100 ~ 240V 50/60Hz 65VA
size 1.0A or 1.8A charging current 87 x 55 x 29mm

How to get Tamiya 55108 Option Parts 7.2V Ni-MH/Ni-Cd Battery AC Charger NIC-01? Click here!

Tamiya 54202 Option Parts F104 Alu. Upper Sus. Mount

Fine-tune your chassis to match the track conditions with this blue anodized Aluminum Upper Suspension Mount set. Up to four different camber angles can be set.

Specs & Features
Aluminum Upper Suspension Mount x 1pc.
Can be used with F104 and F104 PRO chassis.
*This item is not included in F104 PRO assembly kit models.


How to get Tamiya 54202 Option Parts F104 Alu. Upper Sus. Mount? Click here!

Tamiya 54201 Option Parts F104 Plated Mesh Wheel RubberT

Make your 1/10 R/C Ferrari F60 stand out with Tamiya's metal plated wheels. The wheels feature a matt finish.

Specs & Features
Front tires x 2pcs.
Rear tires x 2pcs.
Tires not included.


How to get Tamiya 54201 Option Parts F104 Plated Mesh Wheel RubberT? Click here!

Tamiya 51398 Spare Parts F104 Mesh Wheels (Rubber Tire)

Specs & Features

Set includes two front and two rear wheels for rubber tire use.
Rubber tires are not included.
*Cannot be used with sponge tires.


How to get Tamiya 51398 Spare Parts F104 Mesh Wheels (Rubber Tire)? Click here!

Tamiya 50724 Spare Parts PIAA Accord VTEC Wheels*2

Compatible Chassis or Parts: SP 419, 454, 476, 810OP 214, 220 , 224, 227, 293, 294 Offset + 2mm

How to get Tamiya 50724 Spare Parts PIAA Accord VTEC Wheels*2? Click here!

Tamiya 57768 1/10 XB - Expert Built XB Beetle (M-04L)

About the Volkswagen Beetle
The Volkswagen Type 1, or more commonly known as the Beetle or Bug, was produced from 1938 until 2003, and is still one of the most beloved cars of all time. As a small economical People's Car built to pre-war specifications, the Beetle s simple design proved to be extremely reliable, with its rear-mounted, air-cooled flat-four engine and suspension system withstanding even combat conditions of WWII. Its distinctive aerodynamic shape was the source of its now famous Beetle name, and the round shape also inspired such monikers as bubble and turtle in various countries around the world. Idolized in popular culture since the 1960's, the car has made numerous appearances in movies such as The Love Bug and children all over the world will recognize the yellow Autobot 'Bubblebee' from Transformers. The original Beetle was finally replaced by the New Beetle after an amazing production run that spanned 65 years.

About the Model
Ready-to-Run R/C model of the legendary Volkswagen Beetle.
Monocoque M-04L chassis features mid-mounted Type 540 motor and rear wheel drive.
4-wheel independent double wishbone suspension with lightweight front/rear uprights for smooth running performance.
Equal length steering arms provide optimum balance and steering response. - Equipped with a total of eight 1050 size ball bearings for smooth and efficient operation.
Distinctive Beetle body styling is recreated faithfully with vacuum-formed polycarbonate material and is factory-finished by professional Tamiya staff.
Body shell is highlighted with metal plated bumpers and side mirrors for added realism.
Includes ESC (TEU-101 BK), Type 540 motor, and Expec R/C System.


How to get Tamiya 57768 1/10 XB - Expert Built XB Beetle (M-04L)? Click here!

Tamiya 51397 Bodies Ferrari F60 Body

Specs & Features
Polycarbonate body of the Ferrari F60.
The side mirrors, front and rear wings, driver figure, screws & nuts, sticker sheet are included.
Paint your F60 with separately available polycarbonate spray Item: 89922 PS F60 Ferrari Red.


How to get Tamiya 51397 Bodies Ferrari F60 Body? Click here!

Tamiya 51396 Bodies BMW M3 GT2 2009 Body

The 2009 BMW M3 GT2 was developed to compete in the American Le Mans Series. Rahal Letterman Racing raced the cars on behalf of BMW Motorsports. The return of BMW to the American Le Mans Series competitions coincided with the 10-year anniversary of the series in 2008.

Specs & Features
Polycarbonate shell captures the powerful form of the BMW M3 GT2 2009.
Set includes LED positions to illuminate your car with lights.
Silver metal plated light cases included.
Screws & nuts, sticker sheet, and masking seals included.
Can be used with any TT-01 (Normal wheelbase), TA05, or TB-03 chassis.


How to get Tamiya 51396 Bodies BMW M3 GT2 2009 Body? Click here!

Tamiya 53418 Option Parts TL-01 Unversial Shaft

Compatible Chassis or Parts : TL-01, FF02

How to get Tamiya 53418 Option Parts TL-01 Unversial Shaft? Click here!

Tamiya 54203 Option Parts F104 Alu. Servo Mount L/R

Improve overall chassis rigidity and create a sharper steering response with this blue anodized Aluminum Servo Mount set.

Specs & Features
Aluminum Servo Mount (L) x 1pc.
Aluminum Servo Mount (R) x 1pc.
Can be used with F104 and F104 PRO chassis.
*This item is not included in F104 PRO assembly kit models.


How to get Tamiya 54203 Option Parts F104 Alu. Servo Mount L/R? Click here!

Tamiya 53745 Option Parts Rear Sponge Tires 35 (30mm Width)

RC GP Rear Sponge Tires 35
A pair of sponge tires that efficiently transmit the power generated by a glow engine to true running performance. Tires provide excellent grip performance at any temperature. Tires come pre-attached to wheel. The number of the tire denotes the hardness. The higher the number, the harder the tire. The lower the number the better the gripping performance.

How to get Tamiya 53745 Option Parts Rear Sponge Tires 35 (30mm Width)? Click here!

Tamiya 53746 Option Parts Rear Sponge Tires 37 (30mm Width)

RC GP Rear Sponge Tires 37
A pair of sponge tires that efficiently transmit the power generated by a glow engine to true running performance. Tires provide excellent grip performance at any temperature. Tires come pre-attached to wheel. The number of the tire denotes the hardness. The higher the number, the harder the tire. The lower the number the better the gripping performance.

How to get Tamiya 53746 Option Parts Rear Sponge Tires 37 (30mm Width)? Click here!

Tamiya 53480 Option Parts TA04 LightWeight Diff.Joint

Compatible Chassis or Parts : TA04?PRO, TRF414M

How to get Tamiya 53480 Option Parts TA04 LightWeight Diff.Joint? Click here!

Tamiya 53155 Option Parts Low Friction Aluminum Damper

Tamiya 53155 Option Parts Low Friction Aluminum Damper

How to get Tamiya 53155 Option Parts Low Friction Aluminum Damper? Click here!

Tamiya 54167 Option Parts F104 Sponge Tires B (4430 Front)

Sponge tires X 2pcs.
Tire inner diameter: 44mm, Tire width: 30mm.
These tires have a harder composition in comparison with Spare Parts Item 51384 F104Sponge Tires B (4430, Front, Standard).

How to get Tamiya 54167 Option Parts F104 Sponge Tires B (4430 Front)? Click here!

Tamiya 53479 Option Parts TA04 Low Friction Suspension Shaft

Compatible Chassis or Parts : TA04.PRO, TA04

How to get Tamiya 53479 Option Parts TA04 Low Friction Suspension Shaft? Click here!

Tamiya 50871 Spare Parts TA04 Battery Holder

Tamiya 50871 Spare Parts TA04 Battery Holder

How to get Tamiya 50871 Spare Parts TA04 Battery Holder? Click here!

Tamiya 53977 Option Parts TRF501X Low Friction Piston(1.3cm dia.)

These precision-made polyacetal (POM) damper pistons offer different diameter piston holes to provide drivers with the options to create more detailed suspension settings. Note: These pistons cannot be used with CVA or TRF dampers.

How to get Tamiya 53977 Option Parts TRF501X Low Friction Piston(1.3cm dia.)? Click here!

Tamiya 53976 Option Parts TRF501X Low Friction Piston(1.2cm dia.)

These precision-made polyacetal (POM) damper pistons offer different diameter piston holes to provide drivers with the options to create more detailed suspension settings. Note: These pistons cannot be used with CVA or TRF dampers.

How to get Tamiya 53976 Option Parts TRF501X Low Friction Piston(1.2cm dia.)? Click here!

Tamiya 53826 Option Parts TB-Evo4 F.C.Ball-Head King Pin

These flourine coated ball head king pins allow for smoother suspension operation.

How to get Tamiya 53826 Option Parts TB-Evo4 F.C.Ball-Head King Pin? Click here!

Tamiya 53456 Option Parts TA04 Turnbuckle Upper Arm Set

Compatible Chassis or Parts : TA04.PRO, TA04

How to get Tamiya 53456 Option Parts TA04 Turnbuckle Upper Arm Set? Click here!

Tamiya 50870 Spare Parts TA04 Front Hub Carrier

Compatible Chassis or Parts : TA04.PRO, TA04

How to get Tamiya 50870 Spare Parts TA04 Front Hub Carrier? Click here!

Tamiya 50509 Spare Parts F-1 Front Spring Set

Compatible Chassis or Parts : F103

How to get Tamiya 50509 Spare Parts F-1 Front Spring Set? Click here!

Tamiya 50893 Spare Parts TA04 Spur Gear 83T

Compatible Chassis or Parts : TA04

How to get Tamiya 50893 Spare Parts TA04 Spur Gear 83T? Click here!

Tamiya 58450 1/10 Electric Car TT-01R Type-E Chassis Kit

Tamiya 58450 1/10 Electric Car TT-01R Type-E Chassis Kit

How to get Tamiya 58450 1/10 Electric Car TT-01R Type-E Chassis Kit? Click here!

Tamiya 58448 1/10 Electric Car COROLLA Axio apr GT (TA05v.2)

Tamiya 58448 1/10 Electric Car COROLLA Axio apr GT (TA05v.2)

How to get Tamiya 58448 1/10 Electric Car COROLLA Axio apr GT (TA05v.2)? Click here!

Tamiya 58449 1/10 Electric Car M3 GT2 09 (TT01E)

Tamiya 58449 1/10 Electric Car M3 GT2 09 (TT01E)

How to get Tamiya 58449 1/10 Electric Car M3 GT2 09 (TT01E)? Click here!

Tamiya 58447 1/10 RC Ferrari F60 F104

Tamiya 58447 1/10 RC Ferrari F60 F104

How to get Tamiya 58447 1/10 RC Ferrari F60 F104? Click here!

Tamiya 54207 Option Parts TRF416X Low Friction Belt R

Tamiya 54207 Option Parts TRF416X Low Friction Belt R

How to get Tamiya 54207 Option Parts TRF416X Low Friction Belt R? Click here!

Tamiya 54208 Option Parts 5x8mm Alu.Hex Ball Fluorine *5

Tamiya 54208 Option Parts 5x8mm Alu.Hex Ball Fluorine *5

How to get Tamiya 54208 Option Parts 5x8mm Alu.Hex Ball Fluorine *5? Click here!

Tamiya 54209 Option Parts 5x5mm Alu.Hex Ball Fluorine *5

Tamiya 54209 Option Parts 5x5mm Alu.Hex Ball Fluorine *5

How to get Tamiya 54209 Option Parts 5x5mm Alu.Hex Ball Fluorine *5? Click here!

Tamiya 54206 Option Parts CR-01 Turnbuckle Tie-Rod Set

Tamiya 54206 Option Parts CR-01 Turnbuckle Tie-Rod Set

How to get Tamiya 54206 Option Parts CR-01 Turnbuckle Tie-Rod Set? Click here!

Tamiya 54200 Option Parts F104 Alu. Body Mount Set

Tamiya 54200 Option Parts F104 Alu. Body Mount Set

How to get Tamiya 54200 Option Parts F104 Alu. Body Mount Set? Click here!

Tamiya 54188 Option Parts Dual Block Tire C Rear 62/35

Tamiya 54188 Option Parts Dual Block Tire C Rear 62/35

How to get Tamiya 54188 Option Parts Dual Block Tire C Rear 62/35? Click here!

Tamiya 54187 Option Parts Dual Block Tire C Front 62/25

Tamiya 54187 Option Parts Dual Block Tire C Front 62/25

How to get Tamiya 54187 Option Parts Dual Block Tire C Front 62/25? Click here!

Tamiya 53342 Option Parts TL01 Speed-Tuned Gear

Tamiya 53342 Option Parts TL01 Speed-Tuned Gear

How to get Tamiya 53342 Option Parts TL01 Speed-Tuned Gear? Click here!

Tamiya 51401 Bodies Lancia Delta Body

Tamiya 51401 Bodies Lancia Delta Body

How to get Tamiya 51401 Bodies Lancia Delta Body? Click here!

Tamiya 58446 1/10 Electric Car Lancia Delta DF-03Ra

The Lancia Delta Integrale is now available on the DF-03Ra chassis to allow drivers to experience on and off road driving. The Lancia Delta Integrale dominate the WRC championship from 1987 to 1992. This vehicle went on to win 6 consecutive world championships. The Intergrale was redesigned in 1988 to include a uniquely shaped blister fender. The vehicle also featured a powerful 185ps turbocharged 8-valve 2-liter 4-cylinder fuel injected twin cam engine.

Specs & Features
1/10 scale R/C assembly kit of the Lancia Delta Intergrale DF-03Ra.
Length: 407mm, Width: 186mm, Height: 155mm, Chassis weight: 1,112g.
The durable polycarbonate body accurately captures the features the 1992 WRC championship winning car.
Separately molded rear wing, mirrors, metal plated grille are all precisely reproduced.
Suspension system has plenty of suspension stroke allowing dynamic driving on both on-road and off-road surfaces.
New white 16-spoke wheels (Offset +2) and rally block tires included.
Choice of 4-gear ratios: 8.22:1, 7.90:1, 7.45:1, 7.16:1
Includes two spur gears (78T, 75T) and two pinion gears (29T, 32T)
TEU-104BK ESC and type 540 motor included.
2-channel R/C system, battery pack & charger are separately required.


How to get Tamiya 58446 1/10 Electric Car Lancia Delta DF-03Ra? Click here!

Tamiya 51387 Bodies Ford Bronco 1973 Body

Compatible Chassis or Parts: M03M, M-05, M-05PRO

How to get Tamiya 51387 Bodies Ford Bronco 1973 Body? Click here!

Tamiya 54191 Option Parts M-05 Alu. Racing Steering Set

Hop-up your M-05 chassis with the Aluminum Racing Steering Set. This high precision steering set features greater durability and will provide your M-05 with improved handling. For best performance, use with the Aluminum Steering Set (Item 54191). *Not included in the M-05 PRO.

Specs & Features
Newly designed Steering Arm (Left) (Blue anodized) x 1pc.
Newly designed Steering Arm (Right) (Blue anodized) x 1pc.
3x10mm Screw x 2pcs.
3x0.7mm Spacer (Aluminum) x 2pcs.
5.5x2mm Setting Spacer (Aluminum) x 1pc.
Hollow Ball Connector Nut x 1pc.
5x0.1mm Shim x 4pcs.
3x12mm Hollow Screw x 1pc.
Can be used with M-05 and M-05PRO kits.


How to get Tamiya 54191 Option Parts M-05 Alu. Racing Steering Set? Click here!

Tamiya 54194 Option Parts M-05 Ball Diff Set

Hop-Up your M-05 with the Ball Differential Set. The differential set provides traction and stability to your machine even if one wheel has no contact with the track surface. This is a essential Hop-Up part for your M-05 chassis. *Not included in the M-05 PRO.

Specs & Features
Newly designed Aluminum Differential Joint A (Hard anodized) x 1pc.
Newly designed Aluminum Differential Joint B (Hard anodized) x 1pc.
2x25mm Cap Screw x 1pc.
5x0.5mm Spacer x 1pc.
2mm Nylon Nut x 1pc.
3mm Steel Ball x 8pcs.
Differential Plate x 2pcs.
TRF414X Diff. Spring x 1pc.
Urethane Bushing x 2pcs.
620 Reinforced Thrust Bearing x 1pc.
850 Bearing x 2pcs.
1510 Bearing x 2pcs.
Ball Diff Grease 1g x 1pc.
Diff Carrier x 1pc.
TRF415MSX Y Parts (Swing Shaft Protector) x 1pc.
Can be used with M-05 and M-05PRO kits.

Note: *Use with M03 Assembly Universal Shaft (Item 53597).


How to get Tamiya 54194 Option Parts M-05 Ball Diff Set? Click here!

Tamiya 54197 Option Parts TA05 v.II Alu. Motor Mount set

Fine-tune your TA-05 version II with this new motor mount. This item improves precision and chassis rigidity.

Specs & Features
Motor mount (L) x 1pc.
Motor mount joint x 3pcs.
Pulley cap (blue) x 3pcs.
Center shaft stopper x 1pc.


How to get Tamiya 54197 Option Parts TA05 v.II Alu. Motor Mount set? Click here!

Tamiya 54204 Option Parts DB01 High-Traction Chassis

High-traction chassis for the DB-01.

Specs & Features
This flexible chassis is made of fiberglass-reinforced nylon resin to provide your buggy with more traction on rough surfaces.
Highly dust proof.
This is the same chassis that is found in the high performance DB01R chassis kit (Item 84100).
Can be used with any DB01 chassis machine. (Use with 54040 DB01 Motor Heat Sink)


How to get Tamiya 54204 Option Parts DB01 High-Traction Chassis? Click here!

Tamiya 54195 Option Parts M-05 Alu. Turnbuckle Steer Rod

Hop-Up your M-05 with the Aluminum Turnbuckle Steering Rod. This lightweight steering rod enables quick and easy length adjustments without having to detach the rod from the chassis. *Not included in the M-05 PRO.

Specs & Features
Newly designed 93mm Aluminum Turnbuckle Steering Rod (Blue anodized) x 1pc.
5mm Adjuster x 1pc.
Can be used with M-05 and M-05PRO kits.

Note: *3x89mm Threaded Shaft can also be used.


How to get Tamiya 54195 Option Parts M-05 Alu. Turnbuckle Steer Rod? Click here!

Tamiya 54196 Option Parts TA05 v.II Carbon Rein. K Parts

Hop-Up your TA-05 version II with the Carbon Reinforced K Parts. The carbon reinforced K parts are lighter and stronger than the standard fiberglass K parts provided in the kit. This Hop-Up improves the handling of your vehicle due to the increased rigidity between the steering arms and linkage. The Chassis rigidity is improved once the front and rear braces are installed. Fine tune your vehicles settings further with the damper stays.

Specs & Features
TA-05 ver.II Carbon Reinforced K Parts (Stiffener) x 1.


How to get Tamiya 54196 Option Parts TA05 v.II Carbon Rein. K Parts? Click here!

Tamiya 54192 Option Parts M-05 Alu. Steering Link

Hop-Up your M-05 chassis with the Aluminum Steering Link. This new high precision steering link is very durable and improves the handling and response of your Mini. *Not included in the M-05 PRO.

Specs & Features
Newly designed Steering Link (Blue anodized) x 1pc.
5mm Ball Connector x 2pcs.
5.5x1mm Setting Spacer (Aluminum) x 2pcs.
Can be used with M-05 and M-05PRO Kits


How to get Tamiya 54192 Option Parts M-05 Alu. Steering Link? Click here!

Tamiya 54193 Option Parts M-05 Alu. Steering Post

Hop-Up your M-05 chassis with Aluminum Steering Posts. The steering post set provides your M-05 with greater durability and improved stability. For best performance, use with the Aluminum Steering Set (Item 54191) and Aluminum Steering Link (Item 54192). *Not included in the M-05 PRO.

Specs & Features
Newly designed Steering Post (Blue anodized) x 2pcs.
Newly designed Post Stay (Blue anodized) x 2pcs.
3x8mm Hollow Screw x 2pcs.
3x6mm Screw x 2pcs.
3x12mm Screw x 2pcs.
Can be used with M-05 machines. *It is necessary to replace the kit supplied plastic bearings with ball bearings.
Can be used with M-05PRO kits


How to get Tamiya 54193 Option Parts M-05 Alu. Steering Post? Click here!

Tamiya 54185 Option Parts Dual Block Tire K Front 62/25

These tires feature new tread pattern and are designed for superb control on high-traction on-road and off-road tracks. The tires are designed for use with off road buggies such as the DB-01 and DF-03 chassis. Please note the K denotes kit standard.

Specs & Features
These tires are kit standard for DF-03 and DB-01 chassis kits.
Ideal for using on high traction track surfaces.
54186 Rear tires can be used with 2WD off-road buggies such as DT-02 chassis kits.
Tires x 2pcs. included.
Foam x 2pcs. included.
Item 54185 Front tires are compatible with 62mm (diameter) / 25mm (width) wheels such as Item 53880 Large Dish Wheels (4WD/Front, 62/25).
Item 54186 Rear tires are compatible with 62mm (diameter) / 35mm (width) wheels such as Item 53881 Large Dish Wheels (Rear, 62/35).


How to get Tamiya 54185 Option Parts Dual Block Tire K Front 62/25? Click here!

Tamiya 54186 Option Parts Dual Block Tire K Rear 62/35

These tires feature new tread pattern and are designed for superb control on high-traction on-road and off-road tracks. The tires are designed for use with off road buggies such as the DB-01 and DF-03 chassis. Please note the K denotes kit standard.

Specs & Features
These tires are kit standard for DF-03 and DB-01 chassis kits.
Ideal for using on high traction track surfaces.
54186 Rear tires can be used with 2WD off-road buggies such as DT-02 chassis kits.
Tires x 2pcs. included.
Foam x 2pcs. included.
Item 54185 Front tires are compatible with 62mm (diameter) / 25mm (width) wheels such as Item 53880 Large Dish Wheels (4WD/Front, 62/25).
Item 54186 Rear tires are compatible with 62mm (diameter) / 35mm (width) wheels such as Item 53881 Large Dish Wheels (Rear, 62/35).


How to get Tamiya 54186 Option Parts Dual Block Tire K Rear 62/35? Click here!

Tamiya 54205 Option Parts DB01 Alu. Damper Bushing *2

Aluminum Damper Bushings for the DB-01, TRF501 & TRF511.

These bushings are made with a lightweight and strong A6061 aluminum.
The bushings surface has been treated with a coating to produce a highly durable and very smooth surface.
These bushings enable highly rigid damper attachment and help improve damper performance.
Can be used with DB01 and TRF511 chassis machines. (Use with Buggy Aeration Oil Filled Damper Set, Item 54028).


How to get Tamiya 54205 Option Parts DB01 Alu. Damper Bushing *2? Click here!

Tamiya 56512 1/14 RC Tractor Truck Twin-Spoke Front Alu. Wheels

These newly designed aluminum wheels look sharp on any Tamiya 1/14 scale R/C Tractor Truck. The wheels will highlight the heaviness of your truck and accent the rig.

Specs & Features
Wheel rims and hub are made of aluminum.
Two kinds of hub caps are included to depict those seen on European and North American roads.
Wheels come pre-assembled. x 2pcs.
Wheel hubs x 2 kinds (total 4pcs.)
1.6mm cap screws x 25pcs.
1.5mm hex wrench x 1pc.
2x6mm screws x 6pcs.
Suitable for 22mm wide tires.


How to get Tamiya 56512 1/14 RC Tractor Truck Twin-Spoke Front Alu. Wheels? Click here!

Tamiya 56513 1/14 RC Tractor Truck Twin-Spoke Out. R Alu. Wheels

These newly designed aluminum wheels look sharp on any Tamiya 1/14 scale R/C Tractor Truck. The wheels will highlight the heaviness of your truck and accent the rig.

Specs & Features
Wheel rims and hub are made of aluminum.
Wheels come pre-assembled. x 2pcs.
Wheel hubs x 2pcs.
1.6mm cap screws x 25pcs.
1.5mm box wrench x 1pc.
2x6mm screws x 6pcs.
2mm nuts x 6pcs.
Suitable for 22mm wide tires.


How to get Tamiya 56513 1/14 RC Tractor Truck Twin-Spoke Out. R Alu. Wheels? Click here!

Tamiya 51257 Bodies 1/10 Mobil 1 SC Body Parts

Clear body set of the 1/10 R/C Mobil 1 SC. Fully accurate body depicts Mobil 1 SCs mirrors and rear wing.
* Compatible chassis: TA05, TT-01, TGS, TNS, TB-02, TB Evolution V, TRF415. *Note: may not be used with short wheelbase chassis.


How to get Tamiya 51257 Bodies 1/10 Mobil 1 SC Body Parts? Click here!

Tamiya 51245 Bodies ARATA NSX Body Parts Set

Clear body set of the 1/10 R/C ARTA NSX. Fully accurate body depicts the ARTA NSX as it appeared in the 2005 Super GT.
* Compatible chassis: TA05, TA04 (excluding short wheelbase chassis) TT-01, TGS, TNS, TB-02, TB Evolution IV, TRF415


How to get Tamiya 51245 Bodies ARATA NSX Body Parts Set? Click here!

Tamiya 58445 Electric Toyota Land Cruiser 40 (CC-01 Chassis)

The CC-01 chassis is equipped with an independent double wishbone front suspension and a rear solid axle featuring 4 linkages which support the durable axle case. The suspension provides realistic driving on Concrete/Asphalt and Dirt. Equipped with not only a durable polycarbonate shell, but all the detail and style of the Land Cruiser. Oval-shaped front grille, blinkers, and mirrors parts give it scale realism.

Specs & Features
1/10 R/C assembly kit model of the Toyota FJ40 which is assembled on the CC-01 chassis.
The Toyota FJ40's body is made from lightweight polycarbonate.
Comes with Tamiya LED Light Unit (TLU-01) and two 5mm dia. white LED lights representing the head lights.
Add Tamiya LED Light Control Unit (TLU-02) Item 53937 for a greater sense of realism.
35"" Block style tires and white ABS resin wheels.
Newly designed front bumper
4WD shaft driven bathtub chassis comes with front double wishbone and rear 4-link suspension.
With a Wheelbase of 252mm it's 10mm longer than that of the Mitsubishi Pajero Metaltop Wide (Item 57782)
Type 540 motor and Electronic Speed Controller (TEU-104BK) included.
Stickers and masking seals included.
ESC and type 540 motor included.
2-channel R/C system, battery pack and charger separately required.
Further customize your Toyota FJ40 with a number of Tamiya's Hop-Up Options parts.

How to get Tamiya 58445 Electric Toyota Land Cruiser 40 (CC-01 Chassis)? Click here!

Tamiya 58307 1/10 RC M-Chassis Electric M-04 Alfa Remo Giulia GTA/ESC

To meet customers requests the popular Alfa Romeo Giulia Sprint GTA, first released in 1996 with a M-02M chassis, is being re-released with an M-04M chassis.

About the Giulia Sprint GTA
Alfa Romeo released the speedy Giulia Sprint GTA as a base car to compete for the European Touring Car Championships. With victories in 66, 67 and 69, the GTA name become synonymous with Alfa Romeo high performing sports cars. Despite the elegant and refined design, boasting a light aluminum body and a DOHC four-cylinder engine producing 115hp, there is no doubt this car was built to win. More than 30 years later, the Giulia Sprint GTA is as popular as ever.

About the Model
Polycarbonate body and silver plated front grill
M-04M chassis with a 225mm wheel base (same as the M-02M)
Front tires are 60D Radial and rear tires are 60D Super Grip

How to get Tamiya 58307 1/10 RC M-Chassis Electric M-04 Alfa Remo Giulia GTA/ESC? Click here!

Tamiya 57798 1/10 XB - Expert Built Abarth500 Assetto Corse

This prebuilt vehicle is a R/C replica of the Abarth 500. The Abarth 500 was revealed in May 2008. The real car features a 1.4 liter, 190hp turbo charged engine, strengthened suspension, roll cage and racing bucket seats. Tamiya faithfully reproduces this car in 1/10 scale.

Specs & Features
1/10 R/C Ready-to-Run model of the Abarth 500 Assetto Corse.
Length: 365mm Width: 170mm Height: 142mm Wheelbase: 225mm (Middle wheelbase).
The sporty form of the Abarth 500 comes precisely reproduced with a polycarbonate body and is loaded on the new M-05 chassis.
Side mirrors and rear wing are accurately represented.
Polycarbonate light case parts allow installation of separately available LED lights.
The servo, receiver, and ESC are mounted on the rear of the newly designed monocoque frame for better weight distribution and a lower center of gravity.
The 3-piece tie-rod steering linkage offers sharp cornering performance.
Finespec FM transmitter, TEU-104BK ESC, TRU-05 receiver, TSU-03 servo, and type 540 motor included.
Battery pack & charger are separately required.
Option Parts for M-05 chassis are already available for further customization.

How to get Tamiya 57798 1/10 XB - Expert Built Abarth500 Assetto Corse? Click here!

Tamiya 57795 1/10 XB - Expert Built Super Levant

This prebuilt BMW Z4 depicts the popular Japanese anime character Hatsune Miku. The team Studie GLAD Racing BMW Z4 has been seen at the 2008-2009 Super GT300 Series.

Specs & Features
1/10 Ready-to-Run R/C model of the Studie GLAD BMW Z4 with Hatsune Miku livery.
Length: 440mm, Width: 187mm, Height: 125mm.
Polycarbonate body is fully finished.
The improved steering linkage design features TA05 steering posts for sharper steering response.
Shaft driven 4-wheel drive TT-01 Type-E chassis.
Equipped with LED Light Unit TLU-01 (Item 53909). *It is possible to assemble with the separately available LED Light Control Unit TLU-02 (Item 53937) which allows up to 16 pairs of LEDs (total 32 LEDs) to be controlled.
Each front light case has two 5mm and one 3mm LED Light installation points.
Each rear light case has two 5mm and three 3mm LED Light installation points.
Finespec FM transmitter, TEU-104BK ESC, TRU-05 receiver, TSU-03 servo, and type 540 motor included.
Battery pack and charger separately required.
A wide variety of Option Parts is separately available to further customize your machine.

How to get Tamiya 57795 1/10 XB - Expert Built Super Levant? Click here!

Tamiya 56702 TamTech-Gear Set (Net)TamTech-Gear Hornet

TamTech-Gear is Tamiya's new genre of R/C buggies that are compact in size, yet packed with power and high performance. The second release is based on the classic Hornet racer, and features a stylish black and yellow color scheme. Lightweight 2WD chassis features 4-wheel independent friction damped suspension with fully adjustable shock angle positions. Adjustable slipper clutch and full ball bearings secure optimum transmission efficiency. Ball differential, rear-wheel drive train and universal drive shafts included as standard parts mean that the TamTech-Gear Hornet is much more than just your average mini-R/C car.

About the Model
Compact-sized and ready-to-run 2WD electric R/C off-road buggy.
Racing-ready chassis features 4-wheel independent suspension.
High efficiency 370 size electric motor, rear wheel drive train and overall lightweight structure provides extended running time of more than 30 minutes.
Includes compact ESC, receiver and servo and 2-channel wheel type transmitter (Expec SP).
Full ball bearings for improved transmission efficiency.
Polycarbonate body shell features design patterned after Tamiya's Hornet racing buggy.
battery and charger (not included).
Full lineup of option parts available.


How to get Tamiya 56702 TamTech-Gear Set (Net)TamTech-Gear Hornet? Click here!

Tamiya 51400 Spare Parts F104 Rubber Tires R

Specs & Features
Compatible with item 51398 F104 Mesh Wheels for Rubber Tires

How to get Tamiya 51400 Spare Parts F104 Rubber Tires R? Click here!

Tamiya 51399 Spare Parts F104 Rubber Tires F

Specs & Features
Compatible with item 51398 F104 Mesh Wheels for Rubber Tires

How to get Tamiya 51399 Spare Parts F104 Rubber Tires F? Click here!

Tamiya 51286 Spare Parts TRF501X Diff. Joint

Compatible Chassis or Parts: TRF501X

How to get Tamiya 51286 Spare Parts TRF501X Diff. Joint? Click here!

Tamiya 51182 Bodies Xanavi Nismo Z Body PartsXanavi Nismo Z

Following the release of the Xanavi Nismo Z on the TT-01 chassis (item no. 58330), the body is to be released as a spare body parts set. Set includes accurately replicated polycarbonate body (without holes), side mirrors and rear wing, stickers that can be used with both electric and engine cars, and all necessary fittings.

Compatible chassis: TT-01, TGS, TB-02, TA-04 (excluding short wheel base type) TRF415, TB Evo IV

How to get Tamiya 51182 Bodies Xanavi Nismo Z Body PartsXanavi Nismo Z? Click here!

Tamiya 51184 Bodies Calsonic Impul Z Body Parts

Spare body for the TB-02 and TT-01 (XB) Calsonic Impul Z.

Set Includes:
1.00mm body shell (no holes), wing, mirrors, stickers and all necessary tools.

Compatible chassis: TT-01, TGS, TB-02, TA-04 (excluding short wheel base type) TRF415, TB Evo IV

How to get Tamiya 51184 Bodies Calsonic Impul Z Body Parts? Click here!

Tamiya 51150 Bodies Impreza WRC 2004 Body Parts

Compatible Chassis or Parts: TT-01, TB-02, TA04, TB-01, TL-01, TGS

How to get Tamiya 51150 Bodies Impreza WRC 2004 Body Parts? Click here!

Tamiya 50975 Bodies CLK 2002 Mercedes Body

Compatible Chassis or Parts: TT-01, TA04, TL-01, TB-01, TA03, TG10 Mk.1, TGS, TNS

How to get Tamiya 50975 Bodies CLK 2002 Mercedes Body? Click here!

Tamiya 50971 Bodies Mini Cooper Body

Compatible Chassis or Parts: M-03L

How to get Tamiya 50971 Bodies Mini Cooper Body? Click here!

Tamiya 50959 Bodies Toyota MR-S Racing Body

Compatible Chassis or Parts: TA04-SS

How to get Tamiya 50959 Bodies Toyota MR-S Racing Body? Click here!

Tamiya 50380 Spare Parts E-Ring Set

Tamiya 50380 Spare Parts E-Ring Set

How to get Tamiya 50380 Spare Parts E-Ring Set? Click here!

Tamiya 58364 1/10 Electric Car Nismo R34 GT-R/R34(TT01)

This high-performance R/C model depicts the GT-R(R34) Z-tune, complete with front louver and flared fenders. Aiming for high-display quality as well, this kit includes an LED light unit allowing realistic depiction of head and tail lights. The ultimate road car is now the ultimate R/C machine!

About the GT-R Z-tune
The NISMO team took a Nissan Skyline GT-R (R34) base and hand-built it into a totally customized supercar. The resulting GT-R Z-tune made a huge splash during its unveiling at the 2005 Tokyo Auto Salon. Upgrades to internal mechanics include the souped-up 2.8L twin turbo engine with 500hp output, Sachs special suspension system and brakes jointly designed with engineers from Brembo. The lightweight carbon body features front bumper spoiler, hood with louver, side skirt and rear underspoiler. Full of racing-spec parts while featuring excellent power and handling, NISMO s Z-tune has been called the ultimate road-going car, combining luxury with superior performance.

About the Model
High-quality R/C Nismo GT-R Z-tune on the lightweight, easy to assemble TT-01 chassis
High quality polycarbonate body realistically depicts the ultimate road car GT-R Z-tune
4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox
New plastic parts to reproduce wing, side mirrors, headlight case and tail-light case
Kit includes 4 LED lights to depict head and tail lights, (white headlights x 2, red tail-lights x 2). Lights turn on automatically when R/C car is switched on. Lights cannot be operated independently with straight-from-box settings
Kit includes electronic speed controller (TEU-101 BK)
Wide variety of tune-up parts available (sold separately) allowing the TT-01 to develop with your R/C experience and knowledge


How to get Tamiya 58364 1/10 Electric Car Nismo R34 GT-R/R34(TT01)? Click here!

Tamiya 57770 1/10 XB - Expert Built BMW Z4 M Coupe Racing(TT01) w/Radio/ESC/LED

The BMW Z4 made its debut in 2002 as the replacement for the earlier Z3 roadster. A few years later, the coupe version was unveiled, and it wasn t long before BMW's M Division went to work turning it into a full-fledged racing car. The result was the stylish BMW Z4 M Coupe Racing, which Tamiya now brings to you as a Ready-to-Run R/C car.

About the Model
Ready-to-Run R/C model of the BMW Z4 M Coupe Racing.
User-friendly TT-01 chassis modified by reversing rear suspension arms to create the shorter wheelbase (251mm) for greater scale accuracy.
4WD shaft driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear differential gearbox.
Fully-finished body shell accurately recreates the sleek lines of the Z4 M Coupe race car and is made from durable polycarbonate.
Includes ESC (TEU-101 BK), type 540 motor, and Expec R/C System.
Includes LEDs for head and tail lights that turn on automatically when the car is switched on.
Metal-plated light fixtures enhance the realistic appearance of the LEDs.
Add the TLU-02 Light Control Unit (ITEM 53937) for greater control of light operations.
Wide variety of tune-up parts are separately available to customize your machine.


How to get Tamiya 57770 1/10 XB - Expert Built BMW Z4 M Coupe Racing(TT01) w/Radio/ESC/LED? Click here!

Tamiya 57775 1/10 XB - Expert Built Fairlady Z NISMO

Already released as a 1/24 scale static model, the sleek Fairlady Z Version NISMO will soon be released as a Ready-to-Run R/C model on the latest Enhanced version of Tamiya s widely popular TT-01 chassis, the TT-01 type E.

About the Model
Newly designed TT-01 type E chassis features brand new A Parts and D Parts.
A Parts (Uprights) are made of a polycarbonate plastic material.
D Parts (Upper deck, motor cover, etc.) are made of a fiberglass-reinforced nylon material.
Improved steering linkage design features TA05 steering posts for sharper steering response.
Completely new upper deck enhances chassis rigidity and mimics Tamiya s high-level race- spec machines.
Upper deck also features a convenient transponder mount to further encourage fans to go to their local track and experience R/C racing.
4WD shaft-driven bathtub chassis with coil spring damped, 4-wheel independent double wishbone suspension and sealed front and rear gearboxes.
Nissan Fairlady Z Version NISMO body is accurately reproduced with lightweight polycarbonate.
Includes ESC (TEU-101BK), Type 540 motor, and LEDs for headlights and tail lights.
Wide variety of Option Parts are separately available to customize your machine


How to get Tamiya 57775 1/10 XB - Expert Built Fairlady Z NISMO? Click here!

Tamiya 54190 Option Parts DF-03Ra Carbon R Damper Stay

Fine-tune your DF-03Ra with this new carbon rear damper stay set. The damper stay set creates greater durability and offers additional damper stay attachment positions. This option part is made with durable, lightweight carbon fiber and the damper stay mounts are produced with blue aluminum. The damper stay and mount provide you with additional strength to cope with the rigors of on-road and off-road driving.

Specs & Features
Carbon Rear Damper Stay x 1pc.
Aluminum Damper stay mount x 2pcs. (Blue)
6.5x3.05x1.0mm spacer x 2pcs. (Blue)
3x8mm Screws x 8pcs.
3x10mm Screws x 4pcs.
5mm Ball Connector x 2pcs.
5mm Ball Connector Nut x 2pcs.
5x23.5mm Ball Connector x 2pcs.
Can only be used with DF-03Ra kits.


How to get Tamiya 54190 Option Parts DF-03Ra Carbon R Damper Stay? Click here!

Tamiya 54189 Option Parts DF-03Ra Carbon F Damper Stay

Fine-tune your DF-03Ra with this new carbon front damper stay set. The damper stay set creates greater durability and offers additional damper stay attachment positions. This option part is made with durable, lightweight carbon fiber and the damper stay mounts are produced with blue aluminum. The damper stay and mount provide you with additional strength to cope with the rigors of on-road and off-road driving.

Specs & Features
Carbon Front Damper Stay x 1pc.
Aluminum Damper stay mount x 2pcs. (Blue)
Carbon Damper Stay Setting Spacer Set (from Item 53873) x 2pcs. (Blue)
6.5x3.05x1.0mm spacer x 2pcs. (Blue)
Screws and nuts included.
Can only be used with DF-03Ra machines.


How to get Tamiya 54189 Option Parts DF-03Ra Carbon F Damper Stay? Click here!

Tamiya 54177 Option Parts M-05 Alu. Front Upright

Compatible Chassis or Parts: M-05?M-03?M-04

How to get Tamiya 54177 Option Parts M-05 Alu. Front Upright? Click here!

Tamiya 53259 Option Parts F-1 3.5mm Offest Upright

Compatible Chassis or Parts: F103

How to get Tamiya 53259 Option Parts F-1 3.5mm Offest Upright? Click here!

Tamiya 53175 Bodies Friction Damper Grease (Med)

Compatible Chassis or Parts: TA05 ver.II?TA05-IFS?TA05?TB-03?DF-03Ra?TT-01?TT-01 TYPE-E

How to get Tamiya 53175 Bodies Friction Damper Grease (Med)? Click here!

Tamiya 51394 Spare Parts M-Chassis 11-S Racing Wheel*4

Compatible Chassis or Parts: M03?M04?M-05?M-05PRO

How to get Tamiya 51394 Spare Parts M-Chassis 11-S Racing Wheel*4? Click here!

Tamiya 51055 Spare Parts TRF415 Ball Diff Pulley 35T

Compatible Chassis or Parts: TRF 415

How to get Tamiya 51055 Spare Parts TRF415 Ball Diff Pulley 35T? Click here!

Tamiya 50788 Spare Parts TGX Upper Deck Set

Tamiya 50788 Spare Parts TGX Upper Deck Set

How to get Tamiya 50788 Spare Parts TGX Upper Deck Set? Click here!

Tamiya 50736 Spare Parts B Part (Upright)

Compatible Chassis or Parts: TL-01, FF02

How to get Tamiya 50736 Spare Parts B Part (Upright)? Click here!

Tamiya 58442 1/10 Electric Car Hatsune Miku Z4 (TT01E)

Anime characters have become a popular trend worldwide and recently in sports. The Super GT300 Series, Team Studie GLAD Racing's BMW Z4 incorporated the anime trend into their paint scheme. The vehicle features the characters from a popular Vocaloid Series of Japanese Anime.

1/10 R/C assembly kit of the Hatsune Miku Studie GLAD BMW Z4.
This model features the livery seen at the 2009 Super GT opening race at Okayama.
Polycarbonate body of the BMW Z4.
Includes side mirrors, rear wing, and metal-plated light cases.
Shaft driven 4-wheel drive TT-01 Type-E chassis.
Comes with slick tires snf BBS style mesh wheels.
2 red and 2 yellow 5mm LEDs and LED Light Control Unit TLU-01 (Item 53909) included.
TEU-101BK ESC and type 540 motor included.
2-channel R/C system, battery pack & charger are separately required.
Add the separately available LED Light Control Unit TLU-02 (Item 53937) to allow control of up to 16 pairs of LEDs (total 32 LEDs).
A wide variety of Option Parts are available.


How to get Tamiya 58442 1/10 Electric Car Hatsune Miku Z4 (TT01E)? Click here!